What are the characteristics and fixing methods of steel gratings?

What are the characteristics and fixing methods of the steel grating? What are the characteristics and fixing methods of the steel grating? Do you know the customer friends? Here are the technical staff of the steel grating manufacturer to explain to you, I hope to It is helpful to you.
Steel grating features:
Steel grating high strength, light structure: firm grid welding structure makes it have high load bearing, light structure, easy to hoist and so on, durable and beautiful appearance: hot dip galvanized surface treatment makes it have good corrosion resistance. The surface is beautiful and beautiful; ventilation, lighting, heat dissipation, explosion-proof, anti-slip performance; anti-dirt. Tread plate welding fixed tread plate, directly welded to the ladder beam, does not need to add the side plate of the tread plate, relatively economical and durable but not easy to disassemble, the bolted tread plate needs thickened side plates on both sides, in the side plate On the top, the installation is directly bolted and can be recycled and reused.

Steel grating fixing method:
Steel gratings can be selected by direct welding and mounting clamp fastening. The specific position is on the first flat steel at each corner of the steel grating. The advantage of welding is that it is fixed for a long time and will not loosen. The welding seam has a length of not less than 20mm and a height of not less than 3mm. The advantage of the mounting clip is that it does not damage the hot dip galvanized layer and is easy to disassemble. Each board requires at least 4 sets of mounting clips, and the number of mounting clips increases as the length of the board increases. The safest method is to directly weld the screw head to the beam without the lower clamp, so that the steel grating will not slip off the beam due to the looseness of the mounting clip.